Application:	High-performance Transducer, Three Phase Transducer, General Transducer, Single-phase Transducer, High Frequency Converter Transducer
Output Type:	Triple
Principle of Work:	V/F Control Transducer
Switch Mode:	PWM Control
Main Circuit Type:	Voltage
Voltage of Power Supply:	Low Voltage Variable-Frequency Drive

Voltage level	Rated power (KW)	Rated output current (A)	Adapted motor (KW)
220V single phase	0.75	4.5	0.75
	1.5	7.0	1.5
	2.2	10	2.2
380V three-phase	0.75	2.3	0.75
	1.5	3.7	1.5
	2.2	5	2.2
	4.0	9	4
	5.5	13	5.5
	7.5	17	7.5
	11	24	11
	15	33	15
	18.5	39	18.5
	22	45	22
	30	62	30
	37	75	37
	45	90	45
380V three-phase	55	110	55
	75	150	75
	90	176	90
	110	210	110
	132	260	132
	160	310	160
	185	360	185
	220	420	220
	250	475	250
	280	535	280
	315	595	315
	350	660	350
	400	730	400
	500	930	500
	630	1150	630

enter	Rated voltage, frequency			Three-phase (4T series) 380V; 50 / 60HZ Three-phase (2T series) 220V: 50 / 60HZ
	Allowable voltage range			Three-phase (4T series) 320V ~ 460V three-phase (2T series) 190V ~ 250V
Output	Voltage			4T series; 0 ~ 380V 2T series; 0 ~ 220V
	frequency			Low frequency mode: 0 ~ 300HZ High frequency mode: 0 ~ 3000HZ
	Overload capacity			G-type machine: 110% long-term 150% 1 minute 180% 5 seconds P-type machine: 105% long-term 120% 1 minute 150% 1 second
control method				V / F control, advanced V / F control, V / F separation control, current vector control
Control features		Frequency Set the resolution		Analog input	0.1% of the maximum output frequency
				Digital setting	0.01HZ
		Frequency accuracy		Analog input	Within 0.2% of the maximum output frequency
				Digital input	Set the output frequency within 0.01%
		V / F control		V / F curve (voltage frequency characteristics)	Reference frequency 5 ~ 600HZ arbitrarily set, multi-point V / F curve arbitrarily set, but also choose constant torque, low torque reduction 1, low torque reduction 2, square torque and other fixed curve
				Torque boost	Manual setting: 0.0 ~ 30.0% of rated output Automatic boost: According to the output current and motor parameters automatically determine the lifting torque
				Automatic current limiting and voltage limiting	The motor stator current and voltage are automatically detected during acceleration, deceleration or steady operation, and are suppressed to within the allowable range according to the unique algorithm to minimize the possibility of system fault tripping
Control features		No sense of vector control		Voltage and frequency characteristics	Output voltage to frequency ratio is automatically adjusted based on motor parameters and unique algorithms
				Torque characteristics	Starting torque: 150% of rated torque at 3.0Hz (VF control) 180% of rated torque at 0.5Hz (PG current vector control, flux vector control) 180% of rated torque at 0.05Hz (with PG current vector control) Running speed steady-state accuracy: ≤ ± 0.2% rated synchronous speed Speed fluctuation: ≤ ± 0.5% Rated synchronous speed Torque response: ≤ 50ms PG vector control, PG vector control, flux vector control ≤ 20ms
				Motor parameters self-test	Without any restrictions, the parameters of the motor can be automatically detected in the static and dynamic motor, in order to obtain the best control effect
				Current and voltage suppression	Full current closed-loop control, completely avoid the current impact, with a perfect over-current over-voltage suppression
		Undervoltage suppression during operation		Especially for users with low grid voltage and frequent grid voltage fluctuation, the system can maintain the longest possible running time according to the unique algorithm and residual energy distribution strategy even if the voltage is below the allowable voltage range
Typical function		Multi-speed and swing frequency operation		16 programmable multi-speed control, a variety of operating modes are optional. Swing frequency operation: preset frequency, adjustable center frequency, state memory and recovery after power off
		PID control RS485 communication		Built-in PID controller (presettable frequency) Standard configuration RS485 communication function, a variety of communication protocols optional, with linkage synchronization control function
		Frequency setting		Analog input	DC voltage 0 ~ 10V, DC current 0 ~ 20mA (upper and lower limit optional)
				Digital input	Operation panel setting, RS485 interface setting, UP / DW terminal control, also can be combined with the analog input multiple settings
		output signal		Digital output	2 OC output and one fault relay output (TA, TB, TC), up to 16 meanings
				Analog output	2 analog signal output, the output range of 0 ~ 20mA or 0 ~ 10V flexible set to achieve the set frequency, the output frequency and other physical output
		Automatic voltage regulation		According to the need to choose dynamic voltage regulator, static voltage regulator, unregulated three ways to get the most stable operating results
		Increase, deceleration time setting		0.1S ~ 3600min can be set continuously, S-type, linear model optional
		brake	Energy consumption brake	Energy consumption braking starting voltage, hysteresis voltage and energy consumption braking rate continuously adjustable
			DC braking	Stop DC braking start frequency: 0.00 ~ P0.16 upper limit frequency Braking time: 0.0 ~ 100.0s; Braking current: 0.0% ~ 150.0% of rated current
			Flux braking	0 ~ 100 0: invalid
		Low noise operation		Carrier frequency 1.0KHZ ~ 16.0KHZ continuously adjustable, to minimize motor noise
		Speed tracking speed restart function		It can realize the smooth restarting of the motor during operation and the restarting function of instantaneous stop
		counter		One internal counter to facilitate system integration
		Run the function		Upper and lower limit frequency setting, frequency jump operation, reverse run limit, slip frequency compensation, RS485 communication, frequency increment, decrement control, fault self-recovery operation

display	Operation panel display		Operating status	Output frequency, output current, output voltage, motor speed, set frequency, module temperature, PID setting, feedback amount, analog input and output, etc.
			Alarm content	Six recent fault records, the latest fault trip output frequency, set frequency, output current, output voltage, DC voltage, temperature and other six modules operating temperature records
Protective function				Overcurrent, over voltage, undervoltage, module fault, electronic thermal relay, overheating, short circuit, input and output phase loss, abnormal tuning of motor parameters, internal memory failure, etc.
surroundings		Ambient temperature		-10 ºC ~ +40 ºC (ambient temperature 40 ºC ~ 50 ºC, please use derating)
		Ambient humidity		5% ~ 95% RH, no condensation of water beads
		surroundings		Indoor (no direct sunlight, no corrosion, flammable gas, no oil mist, dust, etc.)
		altitude		Derate the use of more than 1,000 meters, every 1000 meters derated 10%
structure		Degree of protection		IP20
		cooling method		Air-cooled, with fan control
Installation method				Wall-mounted, cabinet type

Voltage level	Inverter model	Power (kw)	Dimensions (mm)			Installation size (mm)			Packing size (mm)			Net weight (kg)
			W1	H1	D.	W2	H2	Φ	long	Width	high
220V single phase	CV900G-00BG-12SF	0.75	90	160	132.5	81	147	4.5	195	132	172	1.06
	CV900G-001G-12SF	1.5										1.06
	CV900G-002G-12SF	2.2										1.1
380V three-phase	A900-4T01R5G/2.2P	1.5										1.06
	A900-4T02R2G/4P	2.2										1.1

Voltage level	Inverter model	Power (kw)	Dimensions (mm)			Installation size (mm)			Packing size (mm)			Net weight (kg)
Voltage level	Inverter model	Power (kw)	W	h	D.	A	B	Φ	long	Width	high	Net weight (kg)
380V three-phase	A900-4T0045G/ 55P	45	295	460	206	195	425	Φ6.5				17.3
	A900-4T0055G/75P	55	300	460	260	195	440.5	Φ6.5				21.25
	A900-4T0075G/93P	75	320	565	281.5	240	545	Φ11				30.8
	A900-4T0093GH/110 P	93	380	670	281.5	240	640	Φ 11				42.7
	A900-4T0110GH/132 P	110	380	670	281.5	240	640	Φ 11				44.0

Voltage level	Inverter model	Power (kw)	Dimensions (mm)			Installation size (mm)			Packing size (mm)			Net weight (kg)
			W	h	D.	A	B	Φ	long	Width	high
380V three-phase	A900-4T0132GH /160P	132	500	780	290	360	745	Hanging Φ11				45.0
	A900-4T0160GH /185P	160										85.0
	A900-4T0185G H /200P	185										85.0
	A900-4T0220G H /250P	220	550	835	320	360	800					104.2
	A900-4T0250G H /280P	250										104.2
Remarks: 132-185kw can be installed in a cabinet with a configurable base, H (height) is 1080mm, and other dimensions remain unchanged.
Remarks: 220-250 kw can be installed in a cabinet with a base, H (height) is 1135 mm, and other dimensions remain unchanged.

VFD 0.75-630kw 3-Phase 380V Variable Frequency Drive

Contact Supplier

Product Description

Company Info.

Basic Info.

Product Description

Send your message to this supplier

Find Similar Products By Category

Hot Searches

You Might Also Like

Product Groups

Contact Supplier